Changes between Version 27 and Version 28 of Eucalyptus-1.5.2-Setup

Show
Ignore:
Timestamp:
02/25/10 17:37:48 (9 years ago)
Author:
ibaldin (IP: 152.54.9.131)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Eucalyptus-1.5.2-Setup

    v27 v28  
    199199 1. connectivity to other ORCA actors 
    200200 1. connectivity to Euca slivers so it can install guests 
    201 This is achieved by creating a bridge on each node with a known name. This example uses 'sliverbr' although the name is not important, as it is not known to ORCA and is hard-wired into Eucalyptus through a patch. The following procedure must be performed on each node (master and client). This presumes the eth1 on the physical host is the interface that leads into the management network or to the public internet. It must not have a configured IP address. 
     201This is achieved by creating a bridge on each node with a known name. This example uses 'sliverbr' although the name is not important, as it is not known to ORCA and is hard-wired into Eucalyptus through a patch. The following procedure must be performed on each node (master and client). This presumes the eth1 on the physical host is the interface that leads into the management network or to the public internet. It must not have a configured IP address. It can be an 802.1q VLAN interface. 
    202202 
    203203 1. Create a bridge and add eth1 into it, then configure the bridge to be the default interface 
     
    226226 
    227227There are two patches - one for the VM creation template (to allow creation of VMs with more than one interface), the other to enable to specify the VLAN tag to be used for a particular security group.  
     228 1. Install the updated VM creation template on client nodes by replacing files gen_kvm_libvirt_xml  and gen_libvirt_xml in Eucalyptus. In Ubuntu/Debian they can be found under $EUCALYPTUS/usr/share/eucalyptus. The two files are attached to this page. 
     229 1. Install the patch for security group VLAN on master node 
    228230 
    229231= Undoing an install =