Changes between Version 31 and Version 32 of Eucalyptus-1.5.2-Setup

Show
Ignore:
Timestamp:
02/25/10 18:21:18 (9 years ago)
Author:
ibaldin (IP: 152.54.9.131)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Eucalyptus-1.5.2-Setup

    v31 v32  
    226226Now that everything is working it is time to re-install the Eucalyptus master from source. Download the source code for 1.5.2 and follow the build instructions. It is advisable to build it in $EUCALYPTUS=/opt/eucalyptus to keep it out of the way of a packaged install. Pay attention to dependencies required to build it. Once built, restart it and test VM creation again. You can reuse the configuration file from the stock install by moving it to $EUCALYPTUS/etc/eucalyptus/eucalyptus.conf.  
    227227 
     228Note that this procedure invalidates any previous configuration you had, so you have to establish new user credentials and upload new images from which VMs are created. 
     229 
    228230On Ubuntu 9.04 we had an issue with stock DHCP server that would not start properly after installing Eucalyptus master from source. It manifested itself by VMs being unreachable (in 'running' state). Log inspection (cc.log on master) revealed that dhcpd would not start when required. Our solution was to build a [http://www.isc.org/software/dhcp/313/download/dhcp-313targz dhcp server] from source and install it in a different location from the stock dhcpd. Then eucalyptus.conf had to be modified to reflect the new location of dhcpd.   
    229231