Changes between Version 5 and Version 6 of Eucalyptus-1.5.2-Setup

Show
Ignore:
Timestamp:
02/04/10 22:38:06 (9 years ago)
Author:
ibaldin (IP: 98.26.55.18)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Eucalyptus-1.5.2-Setup

    v5 v6  
     1[[TOC(depth=99)]] 
    12= Setting up Eucalyptus 1.5.2 with ORCA 2.1 = 
    23 
     
    4849$ virsh list 
    4950}}} 
    50  1. [CN] identify or create a default bridge for kvm/xen to use. Xen by default creates a bridge (xenbr0). KVM requires that a bridge is manually setup. 
     51 1. [CN] identify or create a default bridge for kvm/xen to use. Xen by default creates a bridge (xenbr0). KVM requires that a bridge is manually setup. On Ubuntu this means adding 
     52{{{ 
     53auto br0 
     54iface br0 inet manual 
     55        bridge_ports eth0 
     56        bridge_stp off 
     57        bridge_maxwait 0 
     58}}} 
     59to /etc/network/interfaces. NOTE: in this setup eth0 is the dataplane interface facing into BEN. It remains unconfigured. The management interface is eth1 and is not shown here - it has a static configuration. Restart networking and verify that br0 and eth0 are in the UP state. Verify that bridge br0 exists and eth0 is part of it: 
     60{{{ 
     61$ brctl show 
     62}}} 
    5163 
    5264 
    53 == Undoing an install == 
     65 
     66 
     67= Undoing an install = 
    5468 
    5569When things don't seem to work, fear not, there is a way to start from scratch: