Changes between Version 37 and Version 38 of Eucalyptus-1.6.2-Setup

Show
Ignore:
Timestamp:
06/15/10 15:28:31 (9 years ago)
Author:
shuang (IP: 152.54.8.247)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Eucalyptus-1.6.2-Setup

    v37 v38  
    107107}}} 
    108108 
    109 Note: the eucalptus.conf says that CN's VNET_PUBINTERFACE and VNET_PRIVINTERFACE can be the name of either the bridge (br0 in our case) or the physical interface, however, using the bridge name does not work for me.  
     109Note 1: VNET_SUBNET, VNET_NETMASK and VNET_ADDRSPERNET have to be set up properly, refer to the discussion  
     110Note 2: the eucalptus.conf says that CN's VNET_PUBINTERFACE and VNET_PRIVINTERFACE can be the name of either the bridge (br0 in our case) or the physical interface, however, using the bridge name does not work for me.  
    110111=== Configuring Eucalyptus === 
    111112 1. Euca components. Assume Euca is installed /opt/eucalyptus,  
     
    245246$ sudo vonfig rem eth0.10 
    246247}}} 
     248If the bridges are correctly configured, you should see they've successfully obtained private IP addresses from front-end's dhcp server. 
    247249 1. Check the VMs are created in machines (may have to hunt for them since you don't know which specific compute node a VM will be created on): 
    248250{{{ 
    249251$ virsh list 
    250252}}} 
     253You can use  
     254{{{ 
     255$ virsh console domain-id 
     256}}} 
     257to monitor a VM is successfully started. 
    251258 1. Check the logs 
    252259 * [HN] /var/log/eucalyptus/cc.log