Changes between Version 39 and Version 40 of Eucalyptus-1.6.2-Setup

Show
Ignore:
Timestamp:
06/15/10 15:33:23 (9 years ago)
Author:
shuang (IP: 152.54.8.247)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Eucalyptus-1.6.2-Setup

    v39 v40  
    3434 
    3535=== Configuring Network === 
    36 We assume Xen3.2 is installed. For more detailed information, please refer to [http://open.eucalyptus.com/wiki/EucalyptusNetworking_v1.6].  The notes here are either for the head node [HN], the compute nodes [CN], or for all [ALL] 
     36We assume Xen3.2 is installed. For more detailed information, please refer to [http://open.eucalyptus.com/wiki/EucalyptusNetworking_v1.6].  The notes here are either for the head node (aka front-end) [HN], the compute nodes [CN], or for all [ALL] 
    3737 
    3838 1. [ALL] Install and test ntp. Run ntpdc and verify the output is sane (substitute your own NTP server):  
     
    108108 
    109109Note 1: VNET_SUBNET, VNET_NETMASK and VNET_ADDRSPERNET have to be set up properly, refer to the discussion '''How Eucalyptus allocates VLAN tags''' in [https://geni-orca.renci.org/trac/wiki/Eucalyptus-1.5.2-Setup]. 
     110 
    110111Note 2: the eucalptus.conf says that CN's VNET_PUBINTERFACE and VNET_PRIVINTERFACE can be the name of either the bridge (br0 in our case) or the physical interface, however, using the bridge name does not work for me.  
    111112=== Configuring Eucalyptus ===