Changes between Version 47 and Version 48 of Eucalyptus-1.6.2-Setup

Show
Ignore:
Timestamp:
06/23/10 12:12:13 (9 years ago)
Author:
shuang (IP: 152.54.6.10)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Eucalyptus-1.6.2-Setup

    v47 v48  
    1717=== Installing Eucalyptus 1.6.2 from source === 
    1818 1. use dpkg --get-selections to make sure libc and pthreads development files are installed 
    19  1. apt-get install gcc make apache2-threaded-dev ant openjdk-6-jdk   libvirt-dev libcurl4-gnutls-dev dhcp3-server vblade apache2 unzip curl vlan  bridge-utils libvirt-bin sudo vtun (some of them may not be necessary for compute node installation, e.g., dhcp3-server, vtun, etc) 
     19 1. sodu apt-get install gcc make apache2-threaded-dev ant openjdk-6-jdk   libvirt-dev libcurl4-gnutls-dev dhcp3-server vblade apache2 unzip curl vlan  bridge-utils libvirt-bin sudo vtun (some of them may not be necessary for compute node installation, e.g., dhcp3-server, vtun, etc) 
    2020 1. get tarballs: 
    2121{{{ 
     
    2828   a. Axis2/C 
    2929   a. Rampart/C 
    30  1. adduser eucalyptus 
     30 1. useradd eucalyptus 
    3131 1. run virsh list as eucaplytus, if it does not work - 
    3232   a.  adduser eucalyptus libvirt 
     
    3838 1. [ALL] Install and test ntp. Run ntpdc and verify the output is sane (substitute your own NTP server):  
    3939{{{ 
    40 $ apt-get install ntp 
    41 $ echo server clock3.unc.edu >> /etc/ntp.conf 
    42 $ /etc/init.d/ntp restart 
     40$ sudo apt-get install ntp 
     41$ sudo echo server clock3.unc.edu >> /etc/ntp.conf 
     42$ sudo /etc/init.d/ntp restart 
    4343$ ntpdc 
    4444}}} 
    4545 1. Make sure the dataplane interface (although unconfigured) is UP 
    4646{{{ 
    47 $ ifconfig eth0 up 
     47$ sudo ifconfig eth0 up 
    4848}}} 
    4949 1. [ALL] Test vconfig and brctl: 
    5050{{{ 
    51 $ vconfig add eth0 10 
    52 $ ifconfig eth0.10 
    53 $ vconfig rem eth0.10 
    54 $ brctl show  
     51# vconfig add eth0 10 
     52# ifconfig eth0.10 
     53# vconfig rem eth0.10 
     54# brctl show  
    5555}}} 
    5656 1. [CN] Make sure libvirtd is running: 
    5757{{{ 
    58 $ /etc/init.d/libvirt-bin restart 
    59 $ virsh list 
     58# /etc/init.d/libvirt-bin restart 
     59# virsh list 
    6060}}} 
    6161 1. [CN] identify or create a default bridge for xen to use. Some versions of Xen by default create a bridge (called xenbr0 or eth0 on xen3.2). If your version does not, you can do this manually. One option is: 
     
    7373to /etc/network/interfaces. NOTE: in this setup eth0 is the dataplane interface facing into BEN. It remains unconfigured. The management interface is eth1 and is not shown here - it has a static configuration. Restart networking and verify that bridge br0 exists and eth0 is part of it, verify that br0 and eth0 are in the UP: 
    7474{{{ 
    75 $ brctl show 
    76 $ ifconfig br0 up 
    77 $ ifconfig eth0 up 
     75# brctl show 
     76# ifconfig br0 up 
     77# ifconfig eth0 up 
    7878}}} 
    7979