Changes between Version 19 and Version 20 of Eucalyptus-2.0-Setup

Show
Ignore:
Timestamp:
09/08/10 14:45:32 (9 years ago)
Author:
ibaldin (IP: 152.54.9.21)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Eucalyptus-2.0-Setup

    v19 v20  
    6363root@worker$ $EUCALYPTUS/usr/sbin/euca_conf -d $EUCALYPTUS --hypervisor kvm --instances /usr/local/eucalyptus --user eucalyptus --setup 
    6464}}} 
    65   * Initialize config file on master node: 
     65 * Initialize config file on master node: 
    6666{{{ 
    6767root@master$ $EUCALYPTUS/usr/sbin/euca_conf -d $EUCALYPTUS --setup 
    6868root@master$ $EUCALYPTUS/usr/sbin/euca_conf -d $EUCALYPTUS --enable cloud --enable walrus --enable sc 
    6969}}} 
    70   * Make sure master node has dhcpd installed (typically /usr/sbin/dhcpd or /usr/sbin/dhcpd3). It must not be configured. The worker nodes '''cannot''' deal with multiple DHCP servers on the same subnet in this Eucalyptus mode. The only DHCP server on that subnet must be the one used by Eucalyptus. 
    71   * Modify the configuration of the master node ($EUCALYPTUS/etc/eucalyptus/eucalyptus.conf; only the relevant stanzas are shown; make sure no other VNET_MODE statements are uncommented in the file). Note that in the shown configuration the 10.100.x.x range is used internally by Eucalyptus, while 192.168.203.x range is 'public' (even though it comes from a reserved address space): 
     70 * Make sure master node has dhcpd installed (typically /usr/sbin/dhcpd or /usr/sbin/dhcpd3). It must not be configured. The worker nodes '''cannot''' deal with multiple DHCP servers on the same subnet in this Eucalyptus mode. The only DHCP server on that subnet must be the one used by Eucalyptus. 
     71 * Modify the configuration of the master node ($EUCALYPTUS/etc/eucalyptus/eucalyptus.conf; only the relevant stanzas are shown; make sure no other VNET_MODE statements are uncommented in the file). Note that in the shown configuration the 10.100.x.x range is used internally by Eucalyptus, while 192.168.203.x range is 'public' (even though it comes from a reserved address space): 
    7272{{{ 
    7373VNET_PUBINTERFACE="eth1" 
     
    8282VNET_PUBLICIPS="192.168.203.31-40" 
    8383}}} 
    84   * Modify the configuration of worker nodes ($EUCALYPTUS/etc/eucalyptus/eucalyptus.conf): 
     84 * Modify the configuration of worker nodes ($EUCALYPTUS/etc/eucalyptus/eucalyptus.conf): 
    8585{{{ 
    8686VNET_MODE="MANAGED-NOVLAN"