Changes between Version 56 and Version 57 of Eucalyptus-2.0-Setup

Show
Ignore:
Timestamp:
09/30/10 17:11:46 (9 years ago)
Author:
ibaldin (IP: 152.54.9.21)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Eucalyptus-2.0-Setup

    v56 v57  
    111111root@master$ $EUCALYPTUS/usr/sbin/euca_conf -d $EUCALYPTUS --enable cloud --enable walrus --enable sc 
    112112}}} 
    113  * Make sure master node has dhcpd installed (typically /usr/sbin/dhcpd or /usr/sbin/dhcpd3). It must not be configured. The worker nodes '''cannot''' deal with multiple DHCP servers on the same subnet in this Eucalyptus mode. The only DHCP server on that subnet must be the one used by Eucalyptus. 
     113 * Make sure master node has dhcpd installed (typically /usr/sbin/dhcpd or /usr/sbin/dhcpd3). It must not be configured. The worker nodes '''cannot''' deal with multiple DHCP servers on the same subnet in this Eucalyptus mode. The only DHCP server on that subnet must be the one used by Eucalyptus. '''Apparmor, if running, may need to be configured to allow dhcpd to read/write files from custom locations (e.g. $EUCALYPTUS/var/run/eucalyptus/net ). ''' 
    114114 * Modify the configuration of the master node ($EUCALYPTUS/etc/eucalyptus/eucalyptus.conf; only the relevant stanzas are shown; make sure no other VNET_MODE statements are uncommented in the file). Note that in the shown configuration the 10.100.x.x range is used internally by Eucalyptus, while 192.168.203.x range is 'public' (even though it comes from a reserved address space): 
    115115{{{