Changes between Version 94 and Version 95 of Eucalyptus-2.0-Setup

Show
Ignore:
Timestamp:
12/28/10 12:46:57 (8 years ago)
Author:
ibaldin (IP: 152.54.9.21)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Eucalyptus-2.0-Setup

    v94 v95  
    4343    * Euca2ools 1.3.1 source 
    4444    * Euca2ools 1.3.1 source dependencies 
    45   * Install software build prerequisites from [http://open.eucalyptus.com/wiki/EucalyptusInstallationSource_v2.0 installation instructions] Step 1 on master node. '''Pay attention to the software prerequisites in Step 1, it is preferable to install Sun's Java 1.6.x or above over OpenJDK.''' 
     45  * Install software build prerequisites from [http://open.eucalyptus.com/wiki/EucalyptusInstallationSource_v2.0 installation instructions] Step 1 on master node. '''Pay attention to the software prerequisites in Step 1, it is preferable to install Sun's Java 1.6.x or above over OpenJDK, since ORCA relies on Java 1.6 and does not work with OpenJDK.''' 
    4646 
    4747== Installing master and worker nodes == 
    48 Next step is to build Eucalyptus for worker nodes 
     48Next step is to build Eucalyptus 
    4949 
    5050 * Define EUCALYPTUS to be /opt/eucalyptus-2.0: 
     
    6161root@master$ export LD_LIBRARY_PATH=$INIPARSER_HOME/lib:$LD_LIBRARY_PATH 
    6262}}} 
    63  * Proceed to step 4, but apply NEuca patch attached to this page prior to building Eucalyptus (prior to running ./configure): 
     63 * Apply NEuca patch attached to this page prior to building Eucalyptus (prior to running ./configure) in step '''4''': 
    6464{{{ 
    6565root@master$ cd $EUCALYPTUS_SRC 
    6666root@master$ patch -p0 < ../neuca-0.1.patch 
    6767}}} 
    68  * As step 5, copy this tree (/opt/eucalyptus-2.0-node) to all worker nodes. After this step you should have a built Eucalyptus 2.0 tree on the master node (/opt/eucalyptus-2.0)  and each of the worker nodes (/opt/eucalyptus-2.0-node).  
     68 * As step 5, copy this tree (/opt/eucalyptus-2.0) to all worker nodes. After this step you should have a built Eucalyptus 2.0 tree on the master node (/opt/eucalyptus-2.0)  and each of the worker nodes (/opt/eucalyptus-2.0).  
    6969   * If you don't have rsync installed, a combination of tar and ssh works to copy the Eucalyptus tree just as well:  
    7070{{{ 
    7171root@master$ tar -cf - $EUCALYPTUS | ssh root@worker1 tar -xf - -C / 
    7272}}} 
    73  * Eucalyptus expects all installations (master and worker) on all hosts to be in the same directory. So on each worker node symlink /opt/eucalyptus-2.0-node to /opt/eucalyptus-2.0: 
    74 {{{ 
    75 root@worker$ ln -s /opt/eucalyptus-2.0-node /opt/eucalyptus-2.0 
    76 }}} 
    77  
    7873 * On worker node modify the configuration of the dynamic linker to help locate iniparser library. Create file /etc/ld.so.conf.d/iniparser.conf: 
    7974{{{ 
    80 root@worker1$ echo /opt/eucalyptus-2.0-node/packages/iniparser3.0b/lib > /etc/ld.so.conf.d/iniparser.conf 
     75root@worker1$ echo /opt/eucalyptus-2.0/packages/iniparser3.0b/lib > /etc/ld.so.conf.d/iniparser.conf 
    8176root@worker1$ ldconfig 
    8277root@worker1$ ldconfig -p | grep iniparser 
     
    8580{{{ 
    8681root@worker1$ ldconfig -p | grep iniparser 
    87         libiniparser.so.0 (libc6,x86-64) => /opt/eucalyptus-2.0-node/packages/iniparser3.0b/lib/libiniparser.so.0 
    88         libiniparser.so (libc6,x86-64) => /opt/eucalyptus-2.0-node/packages/iniparser3.0b/lib/libiniparser.so 
     82        libiniparser.so.0 (libc6,x86-64) => /opt/eucalyptus-2.0/packages/iniparser3.0b/lib/libiniparser.so.0 
     83        libiniparser.so (libc6,x86-64) => /opt/eucalyptus-2.0/packages/iniparser3.0b/lib/libiniparser.so 
    8984}}} 
    9085 * Copy this /etc/ld.so.conf.d/iniparser.conf to all worker nodes and run ldconfig command: