Changes between Version 65 and Version 66 of NEuca-in-orca

Show
Ignore:
Timestamp:
06/13/12 13:26:25 (7 years ago)
Author:
ibaldin (IP: 152.54.9.21)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • NEuca-in-orca

    v65 v66  
    125125}}} 
    126126 
    127 === Credentials === 
     127=== Properties === 
    128128 
    129129The file named as eucanet.credentials property above needs to exist and needs to define at least the following properties ('''NOTE: ''' replace 'sitename' in the names of the propeties below with the value of the 'euca.site' property from above [e.g. in this case it would be renci.euca.router and renci.euca.router.type]) : 
     
    138138'sitename'.euca.router.type should be the type and 'sitename'.euca.router should be the IP address or name of router interconnecting Eucalyptus nodes in the dataplane.  
    139139 
     140== !FlowVisor handler == 
     141 
     142If instead of a traditional vlan-based switch your site uses an !OpenFlow switch, you must install FlowVisor and pair it up with the switch and then configure !OpenFlow handler in orca instead of the eucanet handler: 
     143 
     144{{{ 
     145<handler path="providers/flowvisor/handler.xml"> 
     146    <properties> 
     147        <property name="flowvisor.properties" value="/opt/orca-12080/config/flowvisor.properties" /> 
     148    </properties> 
     149</handler> 
     150}}} 
     151 
     152In addition you must install NOX or Floodlight !OpenFlow controller on the same host as the Orca AM and enable it to start the controller by properly defining the configuration properties described below. 
     153 
     154=== Properties === 
     155 
     156The file named as flowvisor.properties property above needs to exist and needs to define at least the following properties: 
     157 
     158{{{ 
     159# this assumes flowvisor is running on the same host as the AM - doesn't have to be that way 
     160flowvisor.url=https://localhost:8080/xmlrpc 
     161flowvisor.user=fvadmin 
     162flowvisor.passwd=somepassword 
     163 
     164# define the port range for floodlight or NOX to use when they start up 
     165fvctrl.first.port=50000 
     166fvctrl.last.port=54999 
     167fvctrl.host=hostname on which controller will run 
     168# type is 'floodlight' or 'nox'. we recommend floodlight 
     169fvctrl.type=floodlight 
     170 
     171# if nox is used, define where it is 
     172nox.core.exec=/opt/nox/bin/nox_core 
     173# if floodlight is used, define where it is 
     174floodlight.jar=/opt/floodlight/floodlight.jar 
     175}}} 
     176 
    140177== Accessing VMs Created by NEuca == 
    141178