Changes between Version 2 and Version 3 of ORCAAndVLANs

Show
Ignore:
Timestamp:
11/18/08 14:19:28 (11 years ago)
Author:
ibaldin (IP: 152.54.9.131)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • ORCAAndVLANs

    v2 v3  
    44 
    55 1. Pick new VLAN tag ID 
     6  * Say it is 505 
    67 1. Access routers/switches on the path and configure the VLANs. Assume links between network equipment and nodes are trunked. 
    78 2. Select nodes on which VMs will reside 
    8  3. Create bridges in each node for this slice (brctl addbr <bridge name, could be slice name>) 
    9  4. Create tagged interfaces in each node for the VLAN in this slice (vconfig add <interface> <tag id>) 
    10  5. Attach VLAN interface to the bridge (brctl addif <bridge name> <vlan interface name>) 
    11  6. Create appropriate configurations for VMs (second interface should have 'bridge=<slice bridge name> option set, to make sure that vif#.# for the data interface in the VM gets attached to the bridge) 
     9 3. Create bridges in each node for this slice  
     10  * brctl addbr bridge-for-slice1 
     11 4. Create tagged interfaces in each node for the VLAN in this slice 
     12  * vconfig add eth0 505 
     13  * ifconfig eth0.505 up 
     14 5. Attach VLAN interface to the bridge  
     15  * brctl addif bridge-for-slice1 eth0.505 
     16 1. Enable slice bridge 
     17  * ifconfig bridge-for-slice1 up 
     18 6. Create appropriate configurations for VMs  
     19  * second interface should have 'bridge=<slice bridge name> option set, to make sure that vif#.# for the data interface in the VM gets attached to the bridge 
    1220 7. Create VMs 
     21 8. Assign IP addresses to the data interfaces in the VM 
     22 9. Test