Changes between Version 1 and Version 2 of VLANMapping

Show
Ignore:
Timestamp:
02/18/10 15:41:42 (9 years ago)
Author:
yxin (IP: 152.54.8.156)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • VLANMapping

    v1 v2  
    993. The mapping is strict one-to-one. 
    1010 
    11 4. For communication over multiple ports with different VLAN IDs, the way to make VLAN mapping work is to put the ports in different port group. Following example is for 3 ports: 
     114. For communication over multiple ports with different VLAN IDs, the way to make mapping work is to wire the ports in different port group. Following example is for 3 ports connecting 3 servers with 3 different VLAN ID: 
    1212 
    13 (a) *giga 1/2:* vlan 100 -> vlan 300, allow vlan 300 in the trunk, vlan mapping enable, connecting *to eth0.100@go-1* 
     13(a) *giga 1/2:* vlan 100 -> vlan 300, allow vlan 300 in the trunk, vlan mapping enable, connecting *to eth0.100@go-1.renci.ben* 
    1414 
    15 (b) *giga 2/1:* vlan 200 -> vlan 300, allow vlan 300 in the trunk, vlan mapping enable, connection to *eth0.200@go-2* 
     15(b) *giga 2/1:* vlan 200 -> vlan 300, allow vlan 300 in the trunk, vlan mapping enable, connection to *eth0.200@go-2.renci.ben* 
    1616 
    17 (c) *giga 2/13*: allow vlan 300 in the trunk , connection to *eth0.300@go-3*  
     17(c) *giga 2/13*: allow vlan 300 in the trunk , connection to *eth0.300@go-3.renci.ben*