Changes between Version 84 and Version 85 of deploy-am

Show
Ignore:
Timestamp:
07/26/12 14:27:06 (7 years ago)
Author:
ibaldin (IP: 152.54.9.21)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • deploy-am

    v84 v85  
    1010 
    1111 * Set up an !OpenStack or Eucalyptus cluster 
     12 * Optionally set up xCAT (if you want to do baremetal node provisioning) 
    1213 * Set up Image Proxy 
    1314 * Optionally setup ssh DNAT Proxy. This component is needed only if the cloud site has no publicly routable IP addresses to assign to VMs. 
     
    1617 * Deploy ORCA into Tomcat container 
    1718 
    18 == Deploying a !OpenStack/Eucalyptus/NEuca authority == 
     19== Deploying an !OpenStack/xCAT/Eucalyptus/NEuca authority actor == 
    1920 
    2021=== Deployment Overview === 
     
    2223Here you can look at [https://wiki.exogeni.net/doku.php?id=public:hardware:start ExoGENI OpenStack/xCAT hardware configurations]. Alternatively, a less expensive option for !OpenStack/Eucalyptus cluster [https://code.renci.org/gf/project/networkedclouds/wiki/?pagename=EucaHardwareConfiguration hardware configuration]. 
    2324 
    24  * The ORCA container is typically set up on the !OpenStack/Eucalyptus head node.  It can be set up on any host with a route to the head node. 
     25 * The ORCA container is typically set up on the !OpenStack/xCAT/Eucalyptus head node.  It can be set up on any host with a route to the head node. 
    2526 * Image Proxy is typically set up on the head node. It can be set up on any host with a route to the head node. Eucalyptus user tools (euca2ools) must be installed on this host. 
    2627 * ssh DNAT proxy must be set up on a host with a publicly routable IP address and a route to the head node 
     
    3435 
    3536Each !OpenStack/Eucalyptus cluster is usually managed by two ORCA actors - one for creating intra-site topologies (named xxx-vm-site), which manages both the cluster and the switch ([https://wiki.exogeni.net/doku.php?id=public:software:start ExoGENI uses a more sophisticated configuration] of actors). The other (named xxx-net-site) is used for connecting to connecting slivers from this site to other sites at Layer 2, if the cluster has access to a dynamic circuit network (NLR, ION, ESnet) either via direct peering or via a pool of static vlans.  
     37 
     38=== Setup xCAT === 
     39 
     40 
    3641 
    3742=== Setup !OpenStack/Eucalyptus ===