Changes between Version 62 and Version 63 of deploy-am

Show
Ignore:
Timestamp:
06/03/11 15:22:06 (8 years ago)
Author:
ibaldin (IP: 152.54.9.21)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • deploy-am

    v62 v63  
    5454=== ssh DNAT Proxy Tunneling and Using Shorewall === 
    5555 
    56 When you need access to VM instances created in a private address space separated from the public Internet, ssh proxy tunneling can be used. We support Shorewall-DNAT proxy for this purpose. Install and run Shorewall on a machine (the NAT host) that is accessible via the public Internet by following instructions at [wiki:shorewall-dnat-proxy Shorewall setup]. To use Shorewall with ORCA, follow instructions for [wiki:shorewall-with-orca Shorewall configuration for ORCA].  
     56When you need ''management'' access to VM instances created in a private address space separated from the public Internet, ssh proxy tunneling can be used. We support Shorewall-DNAT proxy for this purpose. Install and run Shorewall on a machine (the NAT host) that is accessible via the public Internet by following instructions at [wiki:shorewall-dnat-proxy Shorewall setup]. To use Shorewall with ORCA, follow instructions for [wiki:shorewall-with-orca Shorewall configuration for ORCA].  
    5757 
    5858The DNAT Proxy must be installed on a host that has a publicly routable IP address and has a route to the Eucalyptus head node. DNAT Proxy is only needed if the Eucalyptus head node has no publicly routable IP address or has no public IP addresses to give out to the VMs.