Changes between Version 3 and Version 4 of ibm8264vlans

Show
Ignore:
Timestamp:
08/15/14 23:56:17 (5 years ago)
Author:
ibaldin (IP: 108.65.62.60)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • ibm8264vlans

    v3 v4  
    1010 
    1111Netconf is the preferred way of interacting with the G8264. It must first be enabled in order for the switch to respond. 
    12  
    1312 
    1413{{{ 
     
    7069TFTP occurs over port 69 
    71708264.renci.xo(config)# 
    72 </code> 
     71}}} 
    7372 
    74 </if> 
    75  
    76 ===== NETCONF ===== 
     73=== Using NETCONF === 
    7774 
    7875Links 
     
    8178 * [http://www.juniper.net/techpubs/en_US/junos13.2/information-products/pathway-pages/netconf-java-toolkit/netconf-java-toolkit.html Netconf toolkit from Juniper] 
    8279 
    83 **NETCONF XML/RPC Example** 
     80This example shows the common stanzas and the commands (in text) required by the switch to enable the vlans and QoS. Several things to remember: 
    8481 
    85 <code> 
     82 * Unlike Juniper switches, the IBM switch does not terminate its response with a trailing \n 
     83 * Unlike Juniper switches, the IBM can only accept commands in text (not XML)  
     84 * There can only be 128 VMAPs and they must be identified by a number 
     85 
     86{{{ 
    8687ssh noradius@192.168.106.4 -p 830 -s netconf 
    8788