Changes between Version 82 and Version 83 of instructions

Show
Ignore:
Timestamp:
11/17/10 17:53:24 (8 years ago)
Author:
ibaldin (IP: 152.54.9.21)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • instructions

    v82 v83  
    154154 3. Go to User tab (Slice Manager). Click on 'Create Reservation'. Change the number of Units from 1 to something else (for anything greater than 10 you will receive only 10 units as that is the size of the initial delegation) 
    155155 4. Click 'Create' button 
    156  5. Click 'View Reservations'. Click refresh button of your browser until the reservation goes into 'Active' state. 
    157  6. You can optionally close the reservation by selecting a check-box next to it and selecting 'Close' from the menu. 
     156 5. Click 'View All Reservations'. Click refresh button of your browser until the reservation goes into 'Active' state. 
     157 6. You can optionally close the reservation by selecting a check-box next to it and selecting 'Close' from the Action menu. 
     158 
     159For a more sophisticated example that involves manually delegating resources from the site to the broker first 
     160 1. Stop tomcat 
     161 2. Remove $ORCA_HOME/state_recovery.lock file (to make sure we wipe out inventory on the restart) 
     162 3. Edit $ORCA_SRC/webapp/actor_configs/config.xml file by commenting out the <rset> stanza in the topology section at the bottom: 
     163{{{ 
     164                        <edge> 
     165                                <from name="ndl-broker" type="broker" /> 
     166                                <to name="euca-vm-site" type="site" /> 
     167<!-- 
     168                                <rset> 
     169                                        <type>unc.vm</type> 
     170                                        <units>10</units> 
     171                                </rset> 
     172--> 
     173                        </edge> 
     174                </edges> 
     175}}} 
    158176 
    159177 1. Click Site tab -> View Exported Resources -> manage -> Copy the guid of the ticketed reservation; Click Broker tab -> Claim Resources -> Paste the guid -> Click Claim . To further test whether you can create reservations, go to the user tab, click on "Create Reservation", enter number of units of vm (< 100), and then click "Create". Click on "View All Reservations" to see the status of the reservation you created. The status should turn "Active" after a few seconds. To test whether you can close the reservation you created, select the reservation in the same screen, and select "Close" from the drop-down menu next to Action:. Confirm the close, and now if you click on "View All Reservations", you will see the state of the reservation transitioning to "Closed". This should test the basic features of the Emulation mode.