Changes between Version 91 and Version 92 of instructions

Show
Ignore:
Timestamp:
11/23/10 16:49:06 (9 years ago)
Author:
anirban (IP: 152.54.6.35)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • instructions

    v91 v92  
    207207$ python ListResources.py 
    208208}}} 
    209 7. To create a sliver, run the 'createSliver' script. The provided script reads in a NDL resource request from a file called 'id-mp-Request2.rdf'. The example request corresponds to creating 3 virtual machines connected by 3 internal vlans in a triangle topology, with each vm having two interfaces and talking to the other two vms on a separate interface. 
     209 7. To create a sliver, run the 'createSliver' script. The provided script reads in a NDL resource request from a file called 'id-mp-Request2.rdf'. The example request corresponds to creating 3 virtual machines connected by 3 internal vlans in a triangle topology, with each vm having two interfaces and talking to the other two vms on a separate interface. 
    210210{{{ 
    211211$ python createSliver.py 
     
    219219... 
    220220}}} 
    221 8. Once createSliver returns, it outputs the slice UID. You should use the slice UID to operate on the instantiated sliver - to check status, delete etc. Open a file called 'sliceID.txt' and paste the slice UID into it. For the above example, 
     221 8. Once createSliver returns, it outputs the slice UID. You should use the slice UID to operate on the instantiated sliver - to check status, delete etc. Open a file called 'sliceID.txt' and paste the slice UID into it. For the above example, 
    222222{{{ 
    223223$ cat sliceID.txt 
     
    225225$ 
    226226}}} 
    227 9. To check the status of the sliver, run the 'sliverStatus' script. This script assumes that the slice UID is in the file sliceID.txt. This should output the status of each individual resource and the overall sliver status. 
     227 9. To check the status of the sliver, run the 'sliverStatus' script. This script assumes that the slice UID is in the file sliceID.txt. This should output the status of each individual resource and the overall sliver status. 
    228228{{{ 
    229229$ python sliverStatus.py 
    230230}}} 
    231 10. To delete the sliver, run the 'deleteSliver' script. This script assumes that the slice UID is in the file sliceID.txt. 
     231 10. To delete the sliver, run the 'deleteSliver' script. This script assumes that the slice UID is in the file sliceID.txt. 
    232232{{{ 
    233233$ python deleteSliver.py