Changes between Version 28 and Version 29 of xCAT

Show
Ignore:
Timestamp:
09/07/10 12:59:59 (9 years ago)
Author:
shuang (IP: 152.54.8.247)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • xCAT

    v28 v29  
    106106#service dhcpd restart 
    107107}}} 
    108  
     108=== Node Configuration === 
     109To fill in node information, we need to edit nodelist table. Mine looks like: 
     110{{{ 
     111#tabdump nodelist 
     112#node,groups,status,statustime,appstatus,appstatustime,primarysn,comments,disable 
     113"n01","compute,all","netbooting","09-03-2010 15:18:13",,,,, 
     114"n01-ipmi","ipmi,all",,,,,,, 
     115}}} 
     116Note that you only need to specify the node and groups, the status and statustime is populated automatically, it will not reflect the real status if you change it outside of xCAT (e.g. press the power button to turn it off instead of using xCAT's ipmi). In xCAT group is somewhat similar with the concept in Linux. It's convenient in the sense that you can operate commands on a group without specifying each individual member.  
    109117=== IPMI Configuration === 
    110118