Changes between Version 33 and Version 34 of xCAT

Show
Ignore:
Timestamp:
09/07/10 15:22:18 (9 years ago)
Author:
shuang (IP: 152.54.8.247)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • xCAT

    v33 v34  
    131131Note that we will configure ipmi to allow LAN access. Some people may need to use console over LAN access -- this is not covered here.  
    132132=== IPMI Configuration === 
    133 First, when you installed xCAT, an ipmitool package comes with it. Make sure you are not using ipmitool from other sources. You don't need to ipmitool in most cases, but it's important to know if you have troubles. Obviously DELL's ipmi implementation is different from IBM's. To configure IPMI, you can either do it at run time using ipmitool or at boot time (Ctrl-D on DELL PE 860). Mine looks like this: 
     133First, when you installed xCAT, an ipmitool package comes with it. Make sure you are not using ipmitool from other sources. You don't need to ipmitool in most cases, but it's important to know if you have troubles. Obviously DELL's ipmi implementation is different from IBM's. To configure IPMI, you can either do it at run time using ipmitool or at boot time (Ctrl-E on DELL PE 860). Mine looks like this: 
    134134{{{ 
    135135# ipmitool -I lan -H 192.168.201.77 -U root -P renci lan print 1