Changes between Version 64 and Version 65 of xCAT

Show
Ignore:
Timestamp:
09/20/10 18:05:14 (9 years ago)
Author:
shuang (IP: 152.54.8.247)
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • xCAT

    v64 v65  
    258258  1. cp initrd.gz /tftpboot/xcat/netboot/centos5.5/x86_64/compute/initrd.gz 
    259259  1. nodeset compute netboot 
    260  5. Create images for compute nodes with different architectures. Turns out we also have a couple of PE 2950. After updating BIOS to latest, rsetboot boot works as expected. However, since it has an architecture different from the head node (PE 860), the image has to be created differently. First, the PE 2950 does not use tg3 driver for ethernet interfaces. Do to create the image we run: 
     260 5. Create images for compute nodes with different architectures. Turns out we also have a couple of PE 2950. After updating BIOS to latest, rsetboot boot works as expected. However, since it has an architecture different from the head node (PE 860), the image has to be created differently. Most importantly the PE 2950 does not use tg3 driver for ethernet interfaces. To create the image, run: 
    261261 {{{ 
    262262 #genimage -i eth0 -n tg3,bnx2 -o centos5.5 -p compute